**********************************************************************
**                                                                  **
**                         Softex OmniPass                          **
**                            V 3.50.25				    **
** 	 for LifeBook P7010, P7010D and S7010, S7010D               **
**                           Windows XP                             **
**                                                                  **
**********************************************************************

Contents
==================================================================

1. Product notes
2. Operating environment
3. Installation/update procedure
4. Installation check procedure
5. Fixed issues
6. Trademarks and copyrights

==================================================================

1. Product Notes

Please note the following operating conditions before installing 
the Omnipass software update. Do not use this software if you are not 
able to follow these conditions.

a) Re-distribution of this software is prohibited.
b) Conversion, reverse engineering, or disassembly of this software 
   is prohibited. 
c) All copyright notations related to this software must be observed 
   and cannot be changed.
d) This software is provided "as is" without warranty of any kind, 
   either expressed, implied, or statutory, including but not limited 
   to the implied warranties of merchantability and fitness for a 
   particular purpose.

==================================================================

2. Operating environment

1) One of the following operating systems is required to run this 
   software: 
 
   Microsoft(R) Windows(R) XP

2) One of the following FinrgerPrint Sensor drivers must be installed:
   AuthenTec AES2501 : Version 6.26.13.0 or later
   AuthenTec AES2501A : Version 6.28.12.0 or later


==================================================================

3. Installation/update procedure

1) Click [Start] --> [Run]
2) Type a full path to the location of SETUP.EXE and required parameters. 
   Example: SETUP.EXE is located in C:\Omnipass directory. The command line "C:\Omnipass\Setup.exe" 
3) Click [Next] on InstallShield wizard for Omnipass.
4) When Setup is completed,click [Finish] button for restart the computer.

Note: To update the OmniPass software you should have Administrator provileges on the computer.

==================================================================

4.  Installation check procedure

Perform the following procedure to determine whether the installation 
was successful.

1) Click [Start] --> [Control Panel] --> [Add or Remove Program].
2) Select the OmniPass.
3) Click on [Click Here for support information].
4) Verify that the Omnipass version is correct.

==================================================================

5. Fixed Issues

1) Data can be lost if the encryption is canceled
2) Data can be lost after an user double clicks the encrypted file is 
   if "Single click to open an item" is enabled in Folder Options
3) Error message appears when finger print enrollment is skipped in 
   Password Wizard
 
==================================================================

6. Trademarks and copyrights

Copyright(c) 2004-2005 Softex, Inc. All rights reserved.
Copyright(c) 2004-2005 AuthenTec, Inc. All rights reserved.
Copyright(c) 1981-2005 Microsoft Corporation. All rights reserved.
Copyright(C) Fujitsu Limited 2005. All Rights Reserved
Copyright(C) Fujitsu Computer Systems Corporation 2005. 
All Rights Reserved.