To install the 2.02C3 version of the 'Fujitsu LB RWModem V.90 56K E' driver:

 1. Insert the Recovery CD into the CD-ROM drive.
 2. Open the 'Start' menu on the Windows desktop, select the 'Settings'
    menu and open the 'Control Panel' folder.
 3. Open the 'System' icon.
 4. Select the 'Device Manager' tab.
 5. Click the 'Refresh' button.
 6. Click the 'Next' button on the 'Add New Hardware Wizard' window.
 7. Accept the default setting 'Search for the best driver for your
    device (Recommended)' and click 'Next' to continue. 
 8. In the 'Specify a Location' area type, D:\Drivers\Modem. Click
    'Next' to continue. 
 9. Click the 'Next' button.
10. Click the 'Finish' button.
11. Windows will write the modem driver's devices to the 'Device Manager'. 
    Close all open windows and reboot the system before using the modem.  

Note: Use of these instructions assumes that you have already installed all other
core device drivers - audio, video, etc.. - The Add New Hardware Wizard will detect
a 'PCI Communication Device'. If another device is detected you must bypass the
installation (press Cancel) until the wizard finds the 'PCI Communication Device'.