Available on the Web at www.gateway.com/support are the following: technical support for Gateway products, live chat with a Gateway Trusted Guide, files for downloading, and e-mail support.  Additional technical support can be obtained using our Fax on Demand system at (800) 846-4526 and our Automated Troubleshooting System at (800) 846-2118.

=======================
Solo 5350 Audio Drivers
V 5.12.01.1141
Windows 98
7511214
12/11/2001
=======================

Table of Contents
=======================
Overview
Identification
Installation
Applicable Part Numbers
=======================

Overview

This document describes the steps necessary to install and configure audio drivers for the Solo 5350 in Windows 98.


Identification

If you have a Solo 5350 and are running Windows 98, install these audio drivers.


Installation

1.  Locate and open the folder on your hard drive, default path C:\cabs\7511214, where you downloaded and extracted the driver files.  To begin the installation, double-click ESSetup.exe.

2.  In the Setup dialog box, click Next.

3.  Click Next.

4.  In the Setup Complete dialog box, click Finish.

5.  During restart, new hardware is found.

6.  A dialog box opens, stating that the ksclockf.ax file cannot be found.  In the text box, type the location of the windows system files, which is usually C:\Cabs.

7.  Setup reports a version conflict.  Click Yes.

8.  Setup prompts for the location of the MSPclock.sys file.  In the text box, type the location of the windows system files as you did in step 6.

9.  Setup continues automatically.

10.  Setup prompts for the location of the swmidi.sys file.  In the text box, type the location of the windows system files as you did in step 6.

11.  The sound drivers are now installed.


Applicable Part Numbers
3501084
The part number for the driver file is 7511214.