7800 Family Manager Set 3.03S8
                 ==============================


This diskette includes AIC-78XX drivers for DOS, Windows NT v4.0, and NetWare 4.x and 5.x.

The directory structure is as follows:

                  ROOT                 
                  |
                  ---DOS
                  |
                
                  ---NETWARE
		  |
                  ---WINNT
                     |
                     |
                     ----4_0
                         |
                         |
                         ---Ultra
                         |
                         ---Ultra2


*** SPECIAL NOTES FOR THIS RELEASE ***

1. The versions of the driver files included in this FMS release are listed below: 
DOS: 	aspi8u2.sys 	v1.03
	aspi8dos.sys 	v1.35s3_DELL
	aspicd.sys 	v4.01
Netware:aha2940.ham	v7.20s3
	aic78u2.ham	d6.11s3
	nwaspi.cdm	v3.20
NT4.0:	aic78xx.sys	v2.32
	aic78u2.sys	v3.04

2. Netware driver support for Dell SCSI Enclosure Processor(SEP) device is included
in this diskette. When a SEP device is detected during Netware installation without a 
device driver being loaded, you may see an error message complaining no information 
can be obtained for the device. In order to avoid seeing this error message, the "Dell 
SCSI Enclosure Processor Driver" DELLSEP.CDM needs to be loaded. During Netware 
installation, after loading the Adaptec SCSI HAM drivers, switch to 
Netware console, type "load dellsep.cdm" and hit <Enter> to load the driver for SEP device.
Then proceed with the rest of Netware installation. 

3. A new version of nwaspi.cdm driver (v3.20) is included in the Netware directory to fix 
the following issues:
   . Multi-processor support;
   . unloading nwaspi.cdm may causes server abend on nwpa.nlm; and
   . Adaptec CI/O can not detect device with SCSI id greater than 7.
To load this nwaspi.cdm, add a line "load nwaspi.cdm" in the Netware startup.ncf file. 
 
Notes: This nwaspi.cdm requires support pack 8a on Netware 4.2 and support pack 4a on
Netware 5.0.