Installation instructions:                                                
                                                                          
   1) Attach the Audio Interface Module (AIM) to the PCMCIA audio card.
                                                                          
   2) Attach your headset or speakers to the AIM.  Note: when the        
      installation is complete an introductory message will be played.    
                                                                          
   3) Put the PCMCIA audio card hardware into an empty PCMCIA slot
      on your machine.                                                    
                                                                          
   4) Windows 95 should display a message that new hardware was found.    
      It should also display an installation option dialog box.  If
      Windows 95 does not prompt you, the Windows 95 PCMCIA controller
      software is probably not installed.                                                      
      Refer to the installation instructions in the GUIDE95.DOC file on   
      the "Drivers for Windows 95" diskette for more information.
                                                                          
   5) Select the "Driver from disk provided by hardware manufacturer"     

   6) At this point Windows 95 will guide you through the rest of the      
      installation process.                                                
                                                                           
                                                                           
   If you encounter any problems during installation please refer to the   
GUIDE95.DOC file on the "Drivers for Windows 95" diskette.


Windows 95 is a trademark of Microsoft Corporation.