User Installation Notes
=======================

1.  Click on the Start box in the lower left corner and proceed to Settings, Control Panel.
2.  Inside the Control Panel group, click on the Display icon to open the Display Properties folder 
and select the Settings tab (right most tab).
3. click on "Advaced Propeties", then  at Adapter, click on "Change"
4.  Select the "Have Disk..." button and then insert the Driver installation diskette into the floppy 
drive A: or B: and proceed with OK button.
5. Select the S3 Inc. 86CM65' driver
6. Press OK and files are being copied from the diskette to your computer.
7. If a "Version Conflict" dialog box pops up and asks "Do you want to keep this file?", answer 
"No".
8. Press Close again to exit Display Properties folder.
9. Select Yes to restart computer before the new driver will take effect

How to change colordepth
========================

1. Make sure you have installed the driver (see above).
2. Click on the Start box in the lower left corner and proceed to Settings, Control Panel.
3. Inside the Control Panel group, click on the Display icon to open the Display Properties folder 
and select the Settings tab.
4. Click on the pull-down arrow from the Color palette area to select color depth.
5. Choose OK to restart Win95.

How to change resolution
========================

1. Make sure you have installed driver (see section above).
2. Click on the Start box in the lower left corner and proceed to Settings, Control Panel.
3. Inside the Control Panel group, click on the Display icon to open the Display Properties folder 
and select the Settings tab.
4. Ajust the sliding bar either to Less or More from the Desktop area.
5. Choose OK and new resolution will take effect.