SOFTPAQ NUMBER:  SP5860
PART NUMBER:  305724-001
FILE NAME:  MONOPT.INF
TITLE:  Compaq Commercial Monitors Windows INF/ICM Files - Value Series
VERSION:   1.00
LANGUAGE:  English

CATEGORY:  Desktops/Drivers

PRODUCTS AFFECTED:  COMPAQ V40, V45, V50, V55, V70, V75 and V90 Monitors

OPERATING SYSTEM:  INF and ICM files are for Microsoft Windows 95 and 98

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  February 2, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  SP4491 (for the Compaq V40, V50, V70, V90 Monitors only)

DESCRIPTION:  Unpacks the following files to support Compaq value series
monitors.  These are the same files that are on the "Compaq Commercial
Monitors Windows INF/ICM Disk - Value Series," which is distributed
with these monitors.

   MONOPT.INF -  An information file that configures the appropriate driver 
                 for a Compaq Commercial Monitor.

   CPQV40.ICM
   CPQV45.ICM
   CPQV50.ICM
   CPQV55.ICM
   CPQV70.ICM
   CPQV75.ICM
   CPQV90.ICM -  ICM stands for Image Color Matching.
                 These are data files that are used in conjunction with
                 some graphics programs to provide consistent color matching 
                 from monitor screen to printer, or from scanner to the
                 monitor screen.  
                 
HOW TO USE:

   First, determine which version of Microsoft Windows 95 is installed.
   Right-Click your mouse on the My Computer icon and click Properties.
   One of the following Windows versions will be listed; use the correct
   install procedures listed below for your version:

	1. Microsoft Windows 95 4.00.950   (Standard Windows 95 Installation)
	2. Microsoft Windows 95 4.00.950 A (Standard Windows 95 Installation 
                                                with Service Pack 1)  
	3. Microsoft Windows 95 4.00.950 B (Windows 95 OEM Service Pack 2
                                                installation)

   **To install the INF and ICM files for Microsoft Windows 95 and 95A:

   1. Click Start -> Settings -> Control Panel.
   2. Double-click the Display icon.
   3. Click the Settings tab, then click Change Display Type.
   4. Under Monitor Type, click Change -> Have Disk.
   5. In the window of "Copy manufacturer's files from:", type up the
      directory which contains the files extracted from the SP5860.
      Click OK.
   6. Under Models list, select your Compaq monitor, then click OK. The
      monitor files are copied to the hard drive.  
   7. Click OK -> Close to save the settings.
   8. Click Yes when prompted to accept the new refresh settings.


   **To install the INF and ICM files for Microsoft Windows 95B:

   1. Click Start -> Settings -> Control Panel.
   2. Double-click the Display icon.
   3. Click the Settings tab, then click Advanced Properties. 
   4. Select the Monitor tab, then click Change -> Have Disk.
   5. In the window of "Copy manufacturer's files from:", type up the
      directory which contains the files extracted from the SP5860.
      Click OK.
   6. Under Models list, select your Compaq monitor, then click OK. The
      monitor files are copied to the hard drive.  
   7. Click OK -> Close to save the settings.
   8. Click Yes when prompted to accept the new refresh settings.