MonitorMouse(TM) for Windows XP
                          Release 3.3
                         October 15, 2002

                     Elo TouchSystems, Inc.

MonitorMouse for Windows XP contains a native, 32-bit driver
designed for Windows XP, setup program, video alignment
program, 32-bit control panel program, and diagnostic 
applications for Elo TouchSystems' touchmonitors.

=======================================================
Supported Touchmonitors and Elo Touchscreen Controllers
=======================================================

   - All Elo Entuitive brand touchmonitors with an internal
     serial controller

   - Elo Serial Controllers (IntelliTouch(R) 2500S, 2310B, 
     2310, 2300, AccuTouch(R) 2210)

   -------------------------------------------------------
  |                                                       |
  | This driver does not support Elo USB Touchmonitors,   |
  | Elo USB controllers or Elo PC-Bus controllers.        |
  |                                                       |
  | Refer to www.elotouch.com for availability of Windows |
  | XP drivers for these products.                        |
  |                                                       |
   -------------------------------------------------------

========================================
Installing MonitorMouse for Windows XP
========================================

Note: you must have administrator access rights on your
Windows XP system to install MonitorMouse for Windows
XP. You must also have administrator access rights to run
the touchscreen control panel and video alignment
applications.

1.  Shutdown Windows and turn off your computer.

2.  Install your touchmonitor hardware as described in the
    IntelliTouch or AccuTouch Product Manual, Touchmonitor
    Users Guide, or the Quick Start guide.

3.  Start your computer.

4.  After Windows loads, click the Start button, and then click
    Run.

5.  Click the Browse button to locate the SetupElo.exe program in
    the directory containing the driver install files. Highlight
    SetupElo.exe and click Open, then OK to run SetupElo.exe.

6.  Follow the directions on the screen.

7.  Choose the COM port to use with your touchmonitor.

    Select the COM port you connected the touchscreen cable to
    in step 2 above. All serial ports reported by Windows are
    displayed.

8.  Click Next.

9.  Restart Windows when prompted. Make sure you remove any
    floppy disks before restarting. 

    You must run the touchscreen video alignment program after 
    Windows starts up. 

===============================================
Running the Touchscreen Video Alignment Program
===============================================

Use the following procedure to align your touchmonitor after 
installation.

1. Choose Start/Settings/Control Panel and double-click
   the Elo Touchscreen object.

2. Press the align button. 

3. Touch each of the three targets as they appear on the 
   screen. Click Yes when the cursor lines up correctly 
   with your finger. 

4. Click OK to close the touchscreen control panel. 
   
==================================
Changing the Touchmonitor COM Port
==================================

Use the following procedure if you selected the wrong COM port
for your touchmonitor during installation or want to change the
COM port to use with your touchmonitor. You may have restart 
Windows before the new setting will take effect.

1. Re-install the serial driver.

2. Or plug the touchscreen cable into the COM port that you have 
   selected during installation.

==========================================
Uninstalling MonitorMouse for Windows XP
==========================================

1. Click the Start button, point to Settings, and then click
   Control Panel.

2. Double-click the Add/Remove Programs icon.

3. Select MonitorMouse for Windows XP from the list of
   currently installed programs.

4. Click the Change/Remove button then follow the directions 
   on your screen.

5. Restart Windows to complete the uninstall process.

=============
Release Notes
=============

- You must have administrator access rights to run the Elo
  Touchscreen control panel and video alignment applications.

- Because serial communications services are not available
  until late in the Windows XP startup process, the
  touchscreen may not begin to function until several seconds
  after the Windows desktop is displayed.

- To enable the "2-wire", no-handshaking mode, set the
  following DWORD registry key to 0 using regedit.exe:

   HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services
      \EloTouchscreen\NTSerial0\HardwareHandShaking


==========
Known Bugs
==========

- The touchscreen will not work properly when the mouse is
  set for left-handed button configuration in the Mouse
  Properties control panel. Touch will always perform a right
  mouse function when the mouse is set for a left-handed
  user.

- If you press the Cancel button on the Elo Touchscreen
  control panel after using the Apply button, some of the
  applied settings will become un-applied.

- Uninstalling the driver will leave the following empty
  folder on your hard drive:

   C:\Program Files\Elo TouchSystems


==============
Contacting Elo
==============

www.elotouch.com

e-mail: eloinfo@elotouch.com

Elo TouchSystems, Inc.
6500 Kaiser Drive
Fremont, CA 94555
USA
Phone: (800) 557-1458
       (510) 739-4999
Fax:   (510) 739-5353

Elo TouchSystems GmbH & Co. KG
Haidgraben 6
D-85521 Ottobrunn
Germany
Phone: +49 (0) 89/60822-0
Fax:   +49 (0) 89/60822-150

Elo TouchSystems, NV
Diestsesteenweg 692
B-3010 Kessel-Lo
Belgium
Phone: +32 (16) 35-2100
Fax:   +32 (16) 35-2101

Copyright (c) 2002 Elo TouchSystems, Inc.
All rights reserved.

MonitorMouse is a trademark of Elo TouchSystems, Inc.