ASUS NX1001 Network Adapter
                         Windows NDIS driver 


Contents:
---------

1. File Description
2. Driver Installation for Windows 98
3. Parameters Description


1. File Description
-------------------

Filename              Description
=================     =====================================================
readme.txt            Presents a summary of the contents for Windows NDIS
                      driver installation.

netipf.inf	          Windows installation INFormation file for install

ipfnd5.sys            Windows 98 NDIS 5 driver

fSet98B.exe           (Only for Windows98 Sec.)Auto-install utility for Windows Me NDIS 5 driver

2. Driver Installation for Windows 98
------------------------------------------------

    The Windows installation floppy or CD is needed to complete this
    installation.

    Adapter Installation Procedure
    --------------------------------------------
    a. Make sure your computer is power-off.
    
    b. Plug the adapter into one PCI 33MHz slot of your computer.
    
    c. Turn on the power. 


    Install and/or Update driver from diskette(Only for Windows98 Sec.)
    ------------------------------------------
    The following steps can help you install or update the driver by
    fSet98B.exe utility in the Adapter Drivers Diskette/CD-ROM.

     a. Make sure fSet98B.exe utility with all driver files in same folder.

     b. Run fSet98B.exe directly. Then follow the notification of MessageBox Popup 
        Window.
        
    The following steps can help you install or update the driver to
    the one in the Adapter Drivers Diskette/CD-ROM.

    a. Boot from Windows 98.
    b. Windows 98 will pop 'PCI Ethernet Controller' dialog box for the found device. 
       Then click on "Next".
       
    c. Select "Search for the best driver for your device (Recommended)" in the
       'Add New Hardware Wizard' dialog box and then click on "Next".
       
    d. Uncheck "Floppy" and select "Specify a location". "Browse" to the directory where 
       the driver is in. Then click on "Next".
       
    e. Click on "Next".
    
    f. Windows98 will contine installing the driver.
    
    g. Windows98 will ask for the Windows98 Installation CD-Rom.

    h. When Windows 98 displays "ASUS NX1001 Network Adapter"  click on "Finish" to complete
       driver installation.    

3. Parameter Description
------------------------
   - Open 'Device Manager' 
     Double click "ASUS NX1001 Network Adapter", Select 
     "Advanced" item.

	
	Connection Type  Specify the connection type for the adapter.
                         Default: Auto-Sense

	Network Address  Set the Ethernet address for your adapter. 
                         It is not recommended to use this. 
                         Default: read address from adapter ROM.

	No Cable         Set the indication function of "No Cable".
	Indication	 Default : Disabled

	Receive Buffers	 Set the number of Receive Buffers Descriptors
                         Default : 96

	Transmit Buffers Set the number of Transmit Buffers Descriptors
                         Default : 96