ASUS NX1001 Network Adapter
                         UnixWare 7.1.X Driver
                         


Contents:
---------

1. File Description
2. Driver Installation for UnixWare 7.1.X

1. File Description
-------------------

   A. README.TXT    This readme file about the NX1001 UnixWare 7.1.X network
                    driver installation.
   B. NX1001.PKG    NX1001-based 32-bit Unixware 7.1.X Driver package.

2. Driver Installation for UnixWare 7.1.X
---------------------------------------------------
      
   Before you start with the installation process,  make sure that UnixWare 
   system is properly installed and your adapter is properly installed in your
   machine.

   A. Insert driver diskette in floppy drive A, and use 'scoadmin' utility to 
      mount your floppy drive.
   B. Copy the driver package file to UnixWare.
      e.g "cp NX1001.pkg /tmp"
   C. Run 'pkgadd' utility in root directory to add the driver software to 
      system.
      e.g:
          cd /
          pkgadd -d /tmp/NX1001.pkg
      => Select "1  NX1001" to add the driver package to the system.
   D. Use 'scoadmin' utility to add an adapter.
      # scoadmin (UnixWare 7.1.1)
        Select "Networking" -> "Network Configuration Manager" -> "Hardware" 
        -> "Add New Lan Adapter" -> Choose 
        "ASUS NX1001 Network Adapter - PCI Slot ...",
        then add protocol(TCP/IP) to the adapter.
      # netcfg (UnixWare 7.1.3)
        "Network Configuration Manager" -> "HardWare" -> "Add New Lan Adapter"
        -> "ASUS NX1001 Network Adapter - PCI Slot ..."
   E. Return to the command prompt.
   F. Shutdown the system and reboot.(UnixWare 7.1.1)
      # reboot (UnixWare 7.1.3)