/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
* File Name          : Readme.txt
* Author             : MCD Application Team
* Date First Issued  : 03/10/2006
* Description        : Description of the WDG Example.
********************************************************************************
* History:
* 07/17/2006 : V1.0
* 03/10/2006 : V0.1
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
This example shows how to generate a system reset using the WDG peripheral. 
In this example, the WDG is configured to reset system each 4.2s. 
After reset a led connected to P2.18 pin is turned off then after a delay it is 
turned on and after 4.2s the system reset is generated. This behavior is repeated
indefinitely.


Directory contents
==================
75x_conf.h  Library Configuration file
75x_it.c    Interrupt handlers
main.c      Main program


Hardware environment
====================
 - Connect a led to pin P2.18(LD4 on STR75x-EVAL board).
  
  
How to use it
=============
In order to make the program work, you must do the following :
- Create a project and setup all your toolchain's start-up files
- Compile the directory content files and required Library files :
  + 75x_lib.c
  + 75x_wdg.c
  + 75x_gpio.c
  + 75x_mrcc.c
  
- Link all compiled files and load your image into Flash
- Run the example


******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE******