*** This README.TXT file comes with the STR71x Software Library ***

*******************************************************************************
 THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
 CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
 AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
 OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
 OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
 CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************

Example description
===================
 This example is just a theoretical program which demonstrates how to use
 the APB software library and shows some features of the APB peripheral, which
 can for example:

  - Disable/Enable clock gating for each peripheral,
  - Disable/Enable reset for each peripheral.

 This example performs the following:

  - Disable the I2C0 & I2C1 clocks,
  - Keep I2C0 and I2C1 under Reset,
  - Enable clocks for UART 0 1 2 3,
  - Disable Reset for UART 0 1 2 3.

Directory contents
==================
 scat.scf    Scatter file
 71x_conf.h  Library Configuration file
 71x_it.c    Interrupt handlers
 main.c      Main program

Hardware implementation
=======================
 This example works as standalone on the STR7-Eval board (mb393) and
 extra hardware implementation is not required to run the example.

How to use it
=============
 In order to make the program work, you must do the following :

  - Just compile and run it.

(C) COPYRIGHT 2003 STMicroelectronics