/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : readme.txt
* Author             : MCD Application Team
* Version            : V2.2.0
* Date               : 06/13/2008
* Description        : Description of the USB Audio_Speaker Demo.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
The USB Audio Speaker demo gives examples of how to use the STM32F10xxx USB
peripheral to communicate with the PC host in the isochronous transfer mode.
It provides a demonstration of the correct method for configuring an isochronous
endpoint, receiving or transmitting data from/to the host.

More details about this Demo implementation is given in the User manual 
"UM0424 STM32F10xxx USB development kit", available for download from the ST
microcontrollers website: www.st.com/stm32


Directory contents
==================
 + \include: contains the Demo firmware header files
 + \project: contains pre-configured projects for RVMDK
 + \source: contains the Demo firmware source files


Hardware environment
====================
This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation
boards and can be easily tailored to any other hardware.
To select the STMicroelectronics evaluation board used to run the example, uncomment
the corresponding line in platform_config.h file.

    
How to use it
=============
 + RVMDK
    - Open the AudioSpeaker.Uv2 project
    - In the build toolbar select the project config:
        - STM3210B-EVAL: to configure the project for STM32 Medium-density devices
        - STM3210E-EVAL: to configure the project for STM32 High-density devices
    - Rebuild all files: Project->Rebuild all target files
    - Load project image: Debug->Start/Stop Debug Session
    - Run program: Debug->Run (F5)    

NOTE:
 - Medium-density devices are STM32F101xx and STM32F103xx microcontrollers where
   the Flash memory density ranges between 32 and 128 Kbytes.
 - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
   the Flash memory density ranges between 256 and 512 Kbytes.

******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******