SiS IDE Driver Installation For OS/2
   ======================================
1. From the OS/2 desktop, open ^OS/2 system.

2. Open ^System Setup.

3. Click ^Device Driver Install.

4. Put the driver floppy disk in A:

5. Click Source directory ^Change button.

6. Select ^OS2 directory and click ^Set button.

7. Select ^Install.

8. Select ^Exit.

9. Select ^Yes.

10. Select ^OK.

[Note 1] Default Transfer Mode is ^Master DMA Mode

[Note 2] Add /!M option after BASEDEV=SISIDE.ADD in
         CONFIG.SYS to disable ^Master DMA Mode